ACCESSORIES
CONFOL BETA DIMPLED MEMBRANE NAILS
- Special-purpose nails for fixing dimpled membrane to the substrate
- They feature special sealing washers
Find out more
Parameters
| Dimensions (mm) | 2,7 x 35 / 2,7 x 40 / 3,5 x 45 |
Application
- For the fastening of the dimpled membrane to foundations, concrete surfaces, brick surfaces, hollow block surfaces etc.
- Thanks to its plastic washer, a properly fixed nail forms a tight connection between the foundation membrane and the surface to which it is mounted
Benefits
Hardened carbon steel
Tapered head
Sealing washer
Rolled shank
Electrogalvanized
ASSEMBLY
The dimpled membrane should be fixed to the substrate with special nails or screws; at the same time, remember to use sealing washers. The membrane wall fasteners should be used at a distance of approx. 60 cm from one another, always in the middle of the protrusion (i.e. where the wall is contacted).
TRY OUR OTHER PRODUCTS
Conkret is a recycler and a leading manufacturer of regranulates as well as modern polyethylene films. We manage the entire technological process: starting with purchase of waste, its transport, segregation, regranulation to production of new finished products.
Our products are widely used in the furniture, packaging, construction, agricultural and gardening sectors.
More about us
Technological process
YOUR ADVANTAGE OUR TECHNOLOGY
The parameters of our products are similar to the primary raw materials and significantly exceed the properties of conventional produced regranulates.
High efficiency flake washing and drying system, continuous filtration system
- No fouling of finished products
Cascade dual extrusion system
- Higher density and bulk density of regranulate
- Reduced number of gas bubbles in finished products
- No desiccants necessary
Innovative homogenisation system
- Very high degree of homogeneity
- Reduced gel content
- Improved mechanical properties
Automatic mixing and averaging system
- Stabilisation of the finished product production process
ADVICE | 31.05.2022
Strips for dimpled membranes
are finishing and closing strips for insulating the upper part of the cavity drain membrane. They are an indispensable element of building insulation, especially foundation walls.
Read the post
ADVICE | 31.05.2022
Capillary water uptake
The phenomenon of capillary water uptake is the main cause of dampness in walls. It consists in transporting water upwards in a given material. Water is attracted by the pore walls of the material. It mainly depends on: type and…
Read the post
ADVICE | 08.12.2021
Properties of good insulation
Referring to the questions on insulation which we receive, let us explain here what should be considered and what is worth paying attention to when selecting a product to be used as a long-term protection your house against dampness.
Read the post
ADVICE | 31.05.2022
Installation of dimpled membrane
The dimpled membrane is designed to make: vertical insulation of foundations, walls, and ceilings in direct contact with the ground
Read the post
Certificates
WE CARE ABOUT ENVIRONMENTAL PROTECTION
EuCertPlast certification, obtained in 2020, is a confirmation that our regranulates are produced using post-consumer waste and are fully traceable.
As active members of plastics recycling associations, environmental protection is our constant concern.
Check all
+48 56 684 24 00
info@conkret.com.pl