CONSTRUCTION FILMS
Damp proof course CONFOL GAMMA
- Very high watertightness ≥ 60 kPa
- It protects the walls of the building against moisture coming from the ground, preventing the development of fungi and mold
- Special embossing on the surface of the insulation prevents it from moving in the layer of mortar
- Multiple times greater flexibility and lower weight than the insulation of horizontal foundations of similar thickness made of PVC significantly facilitate the installation
- The use of polyethylene in the production of Confol Gamma instead of PVC makes the insulation have better bending and cracking parameters at low temperature
Parameters
Thickness (mm) | 1,0 |
Width (m) | 0,25 / 0,3 / 0,4 / 0,5 / 0,6 |
Length (m) | 30 |
Colour | black / graphite |
Tolerance | 10% |
Application
- Intended for construction of foundations horizontal insulation
- It prevents the ingress of moisture from the ground
- It protects the walls of buildings against moisture and the development of fungi and molds, cutting off the process of capillary rising
- The Confol Gamma foil, thanks to its increased water resistance, is perfect for areas with difficult hydrological conditions
- It protects the wood against the ingress of moisture as an insulation between the wall and the bottom chord
Benefits
Waterproof
Durable
Broad scope of temperatures
Quality Warranty
Recycling
Flexible
Conformity with standards
ASSEMBLY
Horizontal insulation, e.g. Confol Alfa or Gamma, should be placed over the entire width of the footing, with at least 20 cm overlaps. A well-laid membrane does not require additional gluing at the joints, because the pressure of the wall is sufficient to ensure proper insulation due to the vulcanization of the membrane, but it must be tightly connected with the Conbud waterproofing.
The width of the horizontal insulation should be slightly wider than the footing. This will prevent any accidental migration of moisture.
DIAGRAM:
- Strip footing
- Vertical waterproofing of foundations
- Confol Gamma horizontal insulation of foundations
- Foundation
- Foundation thermal insulation
- Confol Beta vertical insulation of foundations
- Confol Alfa horizontal insulation of foundations
- Conbud / Conbud Plus / Hydro B / Ecovil B
- Thermal insulation of the floor on the ground
- Ecobud polyethylene film
TRY OUR OTHER PRODUCTS
Conkret is a recycler and a leading manufacturer of regranulates as well as modern polyethylene films. We manage the entire technological process: starting with purchase of waste, its transport, segregation, regranulation to production of new finished products.
Our products are widely used in the furniture, packaging, construction, agricultural and gardening sectors.
More about usTechnological process
YOUR ADVANTAGE OUR TECHNOLOGY
The parameters of our products are similar to the primary raw materials and significantly exceed the properties of conventional produced regranulates.
High efficiency flake washing and drying system, continuous filtration system
- No fouling of finished products
Cascade dual extrusion system
- Higher density and bulk density of regranulate
- Reduced number of gas bubbles in finished products
- No desiccants necessary
Innovative homogenisation system
- Very high degree of homogeneity
- Reduced gel content
- Improved mechanical properties
Automatic mixing and averaging system
- Stabilisation of the finished product production process
Certificates
WE CARE ABOUT ENVIRONMENTAL PROTECTION
EuCertPlast certification, obtained in 2020, is a confirmation that our regranulates are produced using post-consumer waste and are fully traceable.
As active members of plastics recycling associations, environmental protection is our constant concern.
Check all