CONSTRUCTION FILMS
Vapour barrier film ECOVIL P
- Optimum vapour tightness
- Good tensile and tear strength
- High flexibility
Find out more
Parameters
| Thickness (mm) | 0,2 |
| Dimensions (m) | 2x25 / 2x20 / 2,7x25 / 2,7x50 |
| Colour | yellow / blue |
| Tolerance | 50% |
Application
- Designated for construction of a vapour barrier in roof, wall and flooring structures
- Provides necessary roof protection against damp
- The Ecovil P film can be used as an insulating layer under wooden floors and panels
Benefits
Vapour-barrier
Durable
Broad scope of temperatures
Quality Warranty
Recycling
Flexible
Conformity with standards
Tensile strength
ASSEMBLY
Plastic vapour barrier is laid in a single layer from the inside of the roof structure vertically or horizontally in relation to the rafters. Lay the barrier with a slight tension. The vapour barrier should be overlapped with adhesive tape, and the connection with the rafter is best done with double-sided adhesive tape.
All joints of the plastic vapour barrier strips should be made with the greatest care, using at least a 10 cm overlap in such a way as to prevent the vapour barrier from becoming unsealed.
DIAGRAM:
- Roof beam
- Confol Alfa horizontal insulation of foundations
- Roof plate
- Roof thermal insulation
- Conpar / Conpar Plus / Hydro P / Ecovil P / V-Protect / F-Protect vapour barrier
- Plasterboard
- Vapour-permeable membrane
TRY OUR OTHER PRODUCTS
Conkret is a recycler and a leading manufacturer of regranulates as well as modern polyethylene films. We manage the entire technological process: starting with purchase of waste, its transport, segregation, regranulation to production of new finished products.
Our products are widely used in the furniture, packaging, construction, agricultural and gardening sectors.
More about us
Technological process
YOUR ADVANTAGE OUR TECHNOLOGY
The parameters of our products are similar to the primary raw materials and significantly exceed the properties of conventional produced regranulates.
High efficiency flake washing and drying system, continuous filtration system
- No fouling of finished products
Cascade dual extrusion system
- Higher density and bulk density of regranulate
- Reduced number of gas bubbles in finished products
- No desiccants necessary
Innovative homogenisation system
- Very high degree of homogeneity
- Reduced gel content
- Improved mechanical properties
Automatic mixing and averaging system
- Stabilisation of the finished product production process
ADVICE | 31.05.2022
Strips for dimpled membranes
are finishing and closing strips for insulating the upper part of the cavity drain membrane. They are an indispensable element of building insulation, especially foundation walls.
Read the post
ADVICE | 31.05.2022
Installation of dimpled membrane
The dimpled membrane is designed to make: vertical insulation of foundations, walls, and ceilings in direct contact with the ground
Read the post
ADVICE | 08.12.2021
Properties of good insulation
Referring to the questions on insulation which we receive, let us explain here what should be considered and what is worth paying attention to when selecting a product to be used as a long-term protection your house against dampness.
Read the post
ADVICE | 31.05.2022
Capillary water uptake
The phenomenon of capillary water uptake is the main cause of dampness in walls. It consists in transporting water upwards in a given material. Water is attracted by the pore walls of the material. It mainly depends on: type and…
Read the post
Certificates
WE CARE ABOUT ENVIRONMENTAL PROTECTION
EuCertPlast certification, obtained in 2020, is a confirmation that our regranulates are produced using post-consumer waste and are fully traceable.
As active members of plastics recycling associations, environmental protection is our constant concern.
Check all
+48 56 684 24 00
info@conkret.com.pl