GREEN ROOFS
DIMPLED MEMBRANE DRENAXX 20
• Quick and easy to lay from a roll
• Ideal as a green roof substrate
• Increased resistance to pressure thanks to innovative octagonal profiles
• Quick drainage of excess water into water drains
• It does not decompose
Find out more
Parameters
| Grammage (g/m2) | 1000 |
| Width (m) | 2 |
| Length (m) | 10 |
| Dimple height (mm) | 20 |
| Compressive strength (kN/m2) | 180 |
| Capacity [l/m2] | 7 |
Application
- Hydro-accumulative layer designed for use on flat and sloping green roofs
- It retains water necessary for plants to survive during drought
- Membrane acts as drainage and water storage
- It forms a protective and drainage layer with high resistance to loads while protecting the surface from freezing
Benefits
Waterproof
Durable
Broad scope of temperatures
Quality Warranty
Recycling
Conformity with standards
Reasonable price
ASSEMBLY
The DRENAXX 20 dimpled membrane in the construction of green roofs is laid on a layer of absorbent-protective non-woven fabric. The cusps should face down (the membrane must not be laid with the notches down) and an overlap of two rows of cusps should be created.
To prevent the finer parts of the substrate from washing away, a filter layer of geotextile should be applied to the membrane. Then the substrate is placed on this layer with a layer of vegetation.
TRY OUR OTHER PRODUCTS
Conkret is a recycler and a leading manufacturer of regranulates as well as modern polyethylene films. We manage the entire technological process: starting with purchase of waste, its transport, segregation, regranulation to production of new finished products.
Our products are widely used in the furniture, packaging, construction, agricultural and gardening sectors.
More about us
Technological process
YOUR ADVANTAGE OUR TECHNOLOGY
The parameters of our products are similar to the primary raw materials and significantly exceed the properties of conventional produced regranulates.
High efficiency flake washing and drying system, continuous filtration system
- No fouling of finished products
Cascade dual extrusion system
- Higher density and bulk density of regranulate
- Reduced number of gas bubbles in finished products
- No desiccants necessary
Innovative homogenisation system
- Very high degree of homogeneity
- Reduced gel content
- Improved mechanical properties
Automatic mixing and averaging system
- Stabilisation of the finished product production process
ADVICE | 08.12.2021
Properties of good insulation
Referring to the questions on insulation which we receive, let us explain here what should be considered and what is worth paying attention to when selecting a product to be used as a long-term protection your house against dampness.
Read the post
ADVICE | 31.05.2022
Capillary water uptake
The phenomenon of capillary water uptake is the main cause of dampness in walls. It consists in transporting water upwards in a given material. Water is attracted by the pore walls of the material. It mainly depends on: type and…
Read the post
ADVICE | 31.05.2022
Strips for dimpled membranes
are finishing and closing strips for insulating the upper part of the cavity drain membrane. They are an indispensable element of building insulation, especially foundation walls.
Read the post
ADVICE | 31.05.2022
Installation of dimpled membrane
The dimpled membrane is designed to make: vertical insulation of foundations, walls, and ceilings in direct contact with the ground
Read the post
Certificates
WE CARE ABOUT ENVIRONMENTAL PROTECTION
EuCertPlast certification, obtained in 2020, is a confirmation that our regranulates are produced using post-consumer waste and are fully traceable.
As active members of plastics recycling associations, environmental protection is our constant concern.
Check all
+48 56 684 24 00
info@conkret.com.pl